Finger Pulls

Matt Black 34mm Round Finger Edge Pull, from our current range.

What is a finger pull?

A finger pull is a small, minimal pull, just large enough to hook a finger into, used on cabinetry designed to look handle-free. Rather than a full-length flush pull or a knob, a finger pull is a compact circular or shaped recess, often positioned along the top or side edge of a door or drawer front so it stays out of sight until needed.

Finger pulls are a defining feature of contemporary, handleless kitchen design, where the goal is a completely flat, uninterrupted run of cabinetry fronts.

Where finger pulls are used

• Handleless kitchens – the primary application, giving a flat, minimal look across a full run of cabinetry
• Contemporary wardrobes and fitted furniture – used for the same clean, uninterrupted appearance
• Small drawers – a discreet alternative to a knob on narrow drawer fronts

Choosing the right finger pull

A few practical points are worth checking before you buy:

• Size – finger pulls are intentionally small; check the size still gives a comfortable, secure grip for regular use
• Positioning – typically fitted along the top edge of base units and the side or bottom edge of wall units, for a consistent handleless look
• Recess depth – confirm the door or drawer material is thick enough for the pull's recess
• Finish – matt and satin finishes are popular for handleless kitchens; see our Hardware Finishes Guide

Related products

Browse Finger Pulls via search, or see the related Flush Pulls and Cabinet Knobs guides.

Frequently asked questions

Are finger pulls comfortable to use every day?

Yes, provided the size and position are right for how the cabinet is used – a well-specified handleless kitchen with correctly sized finger pulls works just as well day to day as one with conventional handles.

Can finger pulls be retrofitted to existing cabinets?

This depends on the door or drawer construction, since finger pulls usually need to be routed or recessed during manufacture. Retrofitting is possible on some doors but is best discussed with a joiner or kitchen fitter.

Do finger pulls work on all cabinet materials?

They need enough material thickness to form the recess cleanly, so very thin panels may not be suitable. Check the pull's specification against your door or drawer material before ordering.

Back to the Cabinet & Furniture Hardware Guide, or explore the full Knowledge Centre.